1911 Grips with Integrated Rail Adapter and Changeable Panels
The ReCover 1911 Grip and Rail Systems have proven to be the most stable rail solutions on the market as well as the most popular, and are easily installed on your gun and under 3 minutes. The high-grade, lightweight, glass-reinforced polymer ReCover 1911 grips can be installed without the need for a gunsmith, and requires no permanent modifications to be made to your firearm.
Customize your 1911
1911 Grips
Grip and Rail Systems are covered by US Patent 15688171
Features
Most stable rail solutions on the market
Ability to simply change between grip panels
The CC3P ships with 2 sets of panels – Black and Phantom Grey
There is no need to remove the CC3P to change the grip panels
Install on your gun in under 3 minutes.
The high-grade, lightweight, glass reinforced polymer
Can be installed without the need for a gunsmith
Requires no permanent modifications to be made to your firearm.
HC11 Holster compatible
Lifetime Warranty
Made in Israel
Specs
Weight: 60g
Updated look for your gun
Superior ergonomic design
Full length MIL-STD-1913 Picatinny rail
Field strip compatible
Standard Frame 1911’s only, no “double stacks” or compact frames.
Commander compatible
Installation
Unscrew your old grips
Screw your new grip and rail system into place using existing hardware
Use supplied hardware to tighten rail into place
For grip panel change, unscrew the bottom screw and slide in the new panel
Faq
Frequently Asked Questions – Q. Are the CC3P and CC3H fatter than standard grips?
A. They are not any thicker than standard grips
Q. Will these work on a double stack 1911 or a compact 1911?
A. These will work on all full sized 1911’s only
Q. Are these sturdy enough to handle a light and hold 0?
A. We offer a lifetime warranty on these for a reason, they will hold 0 with a laser mounted and are even sturdy enough to use in conjunction with an upper rail
Q. Do you have a holster that these will work with?
A. The CC3P and the CC3H Grip and Rail Systems are compatible with our HC11 Holster and there are
numerous leather and kydex manufacturers that offer compatible holsters
Q. I am concerned that these will damage my gun
A. There is no way for these to damage your gun, we use the same glass reinforced polymer that most firearm manufacturers use to make their pistol frames.
Q. What is the difference between the CC3P and the CC3H?
A. The CC3P has no material that wraps around the front strap of the frame and also comes with interchangeable grip panels.
Holsters
HC11 Active Retention Holster for the ReCovered 1911 – Left
Click To View
HC11 Active Retention Holster for the ReCovered 1911 – Right
Click To View
7 reviews for CC3P Grip and Rail System for the 1911
Rated 5 out of 5
Bennie (verified owner)–
I love my new CC3P Grip and rail system. The grips fit my hand better than stock from the extra width, the rail for my tactical light was a perfect fit, and the changeable grip panels gave me the option of different colors, and textures. Excellent product, durable and made for quality, awesome pricing, im definently a lifetime customer. Thanks
Rated 5 out of 5
Dean (verified owner)–
Skeptical at first. Ordered the grip and rail system for my Rock Island 1911 and it was an easy install and perfect fit. Very good quality and great looks. The rail system was a perfect fit for my Olight baldr mini. Wish that i can order just the grips alone to give the fun more variety in looks.
Rated 5 out of 5
Yong Kwon (verified owner)–
Received a crimson trace as a gift. I have a Sig 1911. It fit my gun perfectly and has a great feel. Easy to install. The laser unit fit perfectly on the rail. Can’t beat the price. Really impressed. 10 stars.
Rated 5 out of 5
John Winkler –
I have one for years now for my Rock Island GI. It did not quite fit as it would make the slide drag when chambering the next round. It never affected the overall reliability of the gun, but I didn’t like that. So, I took it back off and used a Dremel across the very top to shave it down. I used a grinding rock on the next to slowest speed. I worked it enough to where I could see a gap between the grip and the slide. Works perfectly now. With so many different 1911’s out there, it would be impossible to know that it will fit perfectly on every one of them. It needed a tweak, but works great now!
Rated 5 out of 5
David Davis –
I picked up a CC3H grip and rail system for my GSG 1911 and I am more than happy with the fit and finish. The grip was a little tight on the right hand side of the frame due to the ambidextrous thumb saftey. I was planning on deleting the ambi saftey anyways and once I did everything was perfect. I’ve just fitted a laser to the rail and as expected, fit was perfect. I just received another set I bought to give as a birthday gift to fit a baretta 92fs and once again, absolute perfection. 110% to Recover Tactical. Everyone that owns a handgun without a rail needs one of these systems
Rated 5 out of 5
Bruce (verified owner)–
Excellent design, doesn’t add a lot of width to the grip, deep grooves for shooting finger and thumb. Really modernized my 1911, and it looks really cool too.
Rated 5 out of 5
William Bowden (verified owner)–
Excellent product.. I have added one to each of my 1911s … very sturdy, solid fit … for me , these grips are the #1 solution for a rail system on the 1911 …. I utilize lights on both my pistols ..
Free shipping on orders above $39.95 
Bennie (verified owner) –
I love my new CC3P Grip and rail system. The grips fit my hand better than stock from the extra width, the rail for my tactical light was a perfect fit, and the changeable grip panels gave me the option of different colors, and textures. Excellent product, durable and made for quality, awesome pricing, im definently a lifetime customer. Thanks
Dean (verified owner) –
Skeptical at first. Ordered the grip and rail system for my Rock Island 1911 and it was an easy install and perfect fit. Very good quality and great looks. The rail system was a perfect fit for my Olight baldr mini. Wish that i can order just the grips alone to give the fun more variety in looks.
Yong Kwon (verified owner) –
Received a crimson trace as a gift. I have a Sig 1911. It fit my gun perfectly and has a great feel. Easy to install. The laser unit fit perfectly on the rail. Can’t beat the price. Really impressed. 10 stars.
John Winkler –
I have one for years now for my Rock Island GI. It did not quite fit as it would make the slide drag when chambering the next round. It never affected the overall reliability of the gun, but I didn’t like that. So, I took it back off and used a Dremel across the very top to shave it down. I used a grinding rock on the next to slowest speed. I worked it enough to where I could see a gap between the grip and the slide. Works perfectly now. With so many different 1911’s out there, it would be impossible to know that it will fit perfectly on every one of them. It needed a tweak, but works great now!
David Davis –
I picked up a CC3H grip and rail system for my GSG 1911 and I am more than happy with the fit and finish. The grip was a little tight on the right hand side of the frame due to the ambidextrous thumb saftey. I was planning on deleting the ambi saftey anyways and once I did everything was perfect. I’ve just fitted a laser to the rail and as expected, fit was perfect. I just received another set I bought to give as a birthday gift to fit a baretta 92fs and once again, absolute perfection. 110% to Recover Tactical. Everyone that owns a handgun without a rail needs one of these systems
Bruce (verified owner) –
Excellent design, doesn’t add a lot of width to the grip, deep grooves for shooting finger and thumb. Really modernized my 1911, and it looks really cool too.
William Bowden (verified owner) –
Excellent product.. I have added one to each of my 1911s … very sturdy, solid fit … for me , these grips are the #1 solution for a rail system on the 1911 …. I utilize lights on both my pistols ..