Recover CC3H Grip and Rail System for the 1911

(8 reviews)

$25.00$39.95

Fits all full size 1911’s that do not have a rail. Fits standard Frame 1911’s only, no “double stacks” or compact frames. (For Compact/Officer’s sized, check out the CC3C)

  • 90 DAY MONEY BACK GUARANTEE
  • LIFETIME WARRANTY
Clear

Description

1911 Grips with Integrated Rail Adapter

The ReCover Grip and Rail Systems have proven to be the most stable rail solutions on the market as well as the most popular, and are easily installed on your gun and under 3 minutes. The high-grade, lightweight, glass-reinforced polymer ReCover can be installed without the need for a gunsmith, and requires no permanent modifications to be made to your firearm.  The ReCover 1911 grips are the simplest way to update the look of your 1911 while providing fully a functional picatinny rail

 

Customize your 1911

1911 Grips

Grip and Rail Systems are covered by US Patent US9777983B2

Features

  • Most stable rail solutions on the market
  • Install on your gun in under 3 minutes.
  • The high-grade, lightweight, glass reinforced polymer
  • Can be installed without the need for a gunsmith
  • Requires no permanent modifications to be made to your firearm.
  • HC11 Holster compatible
  • Lifetime Warranty
  • Made in Israel

Specs

  • Weight: 60g
  • Updated look for your gun
  • Superior ergonomic design
  • Full length MIL-STD-1913 picatinny rail
  • Field strip compatible
  • Standard Frame 1911’s only – no “double stacks” or compact frames.
  • Commander compatible
  • 1911 grips

Installation

  • Unscrew your old grips
  • Screw your new grip and rail system into place using existing hardware
  • Use supplied hardware to tighten rail into place

Faq

Frequently Asked Questions – 
Q. Are the CC3P and CC3H fatter than standard grips?

A. They are not any thicker than standard grips
Q. Will these work on a double stack 1911 or a compact 1911?
A.  These will work on all full sized 1911’s only
Q. Are these sturdy enough to handle a light and hold 0?
A. We offer a lifetime warranty on these for a reason, they will hold 0 with a laser mounted and are even sturdy enough to use in conjunction with an upper rail
Q. Do you have a holster that these will work with?
A. The CC3P and the CC3H Grip and Rail Systems are compatible with our HC11 Holster and there are
numerous leather and kydex manufacturers that offer compatible holsters
Q.  I am concerned that these will damage my gun
A.  There is no way for these to damage your gun, we use the same glass reinforced polymer that most firearm manufacturers use to make their pistol frames.
Q. What is the difference between the CC3P and the CC3H?
A.  The CC3P has no material that wraps around the front strap of the frame and also comes with interchangeable grip panels.

Holsters

 

HC11 Active Retention Holster for the ReCovered 1911 – Left

Click To View

 

HC11 Active Retention Holster for the ReCovered 1911 – Right

Click To View

8 reviews for Recover CC3H Grip and Rail System for the 1911

  1. David (verified owner)

    These grips are excellent. Easy to install, perfect fit, and sturdy. I have already recommended them to my friends and family. Thank you for making a quality product.

  2. Nathan McIntyre (verified owner)

    Very easy to install and I do enjoy the larger grip profile. It makes it more comfortable in my hands. Do not forget to order the holster with it though. I ordered one thinking it would fit just fine but it didn’t. On the same site there are match holsters designed for this grip system that work great under the HC11 code. I chose the active retention one so I can take it outdoors and on hikes without any worry of it coming out. I can hang upside down and it’ll stay in the holster. It also means no child can run up and grab it out of the holster if we’re on a family outing in the woods. Its secure and I really enjoy that aspect.

  3. Ovais (verified owner)

    Love the grip and rail! Tan color is awesome on a black 1911 US Army Edition. Great quality, easy install. Feels great when shooting thanks to a comfortable grip from these guys, seriously.

  4. James Hess (verified owner)

    I had searched the internet, and local stores for a rail option for my full size 1911. When I came across the recover rail system I was hesitant, I ordered it anyway, and im extremely glad I did. This adds a completely different texture in the hand that is pleasing, and the rail fits tight and right. I am going to order another for my dads old 1911.

  5. Craig Wells (verified owner)

    I was looking for a rail solution for my Kimber Stainless 11 1911 in 45acp,with 5.25 inch barrel. I discovered the Recover Tactical CC3H Grip and Rail System online and thought it looked like it would be a good solution. I ordered on the website and in just a couple days I had it in my hand, very quick and easy. The only issue I experienced during install was trying to remove one of my factory Kimber screws from the factory grip…the Recover grip install is awesome and easy, took maybe 2-3 minutes and it fits and feels absolutely perfect. The front strap of my Kimber has no grip or stippling but the Recover Grip does so that is one very welcome improvement. Another improvement the grip provides is the cut out at the mag eject button. With my stock rosewood grip they were round and I could not reliably eject the mag with one hand. Now I can perfectly every time and the grip fits my hand way better, it is thinner and flatter. Thanks for this bonus! Of course the reason I purchased is for the rail and it does not disappoint, I can fit my full size Olight Valkary on it with dual switches and there is room to spare! Very Very nice! This grip is built very strong and the shape makes it the most comfortable grip I have had and I own 3 1911`s. Don`t worry about the fit as it fits perfectly and screws on perfectly tight locking solid on your frame. I recommend this quality product because you do not have to drill any holes in your favorite pistol.It comes with the necessary screws and allen wrench for the rail section but you do need to use your grip screws from your handle, maybe buy a new set if you want to color match as they are inexpensive. Purchase this system and you will have the best 1911 in your hand that you have held and you will be smiling!!!

  6. breauxp (verified owner)

    My project is a little different as I got the CC3H Grip and Rail System for a LLAMA 9MM PARABELLUM that I inherited.

    I know very well what this gun is and the challenges that it presents, one of them being that the grips are not standard 1911 shape and the fasteners are in different location.

    I chose to take the time to make the CC3H Grip and Rail System fit as this gun will be enjoyed at the range and nothing more.

    The fit and finish on the grip system is excellent and the polymer is very robust.
    I have spent over an hour filing on them to make the shape changes needed and am impressed that I have found no voids nor had problems with chipping.

    This product has given new life to an old gun and I look forward to many years of enjoyment with it.

  7. Brian M (verified owner)

    Looks great!! Perfect fit. Love the looks of my 1911. Got to get me a light/laser on it now!!

  8. Matt Weaver (verified owner)

    This is a handy setup to add lights and what ever else requires a rail on non railed 1911’s. Install was easy. My only 2 problems and they are not complaints is it was a little fatter than I expected, but then I have small hands. Also I think it should have a more grippy texture. A little too slippery for small hands in my opinion. But we’ll worth the price vs buying a gun with a rail. Fit was also good.

Add a review

Your email address will not be published.

Customer Questions and Answers

    Does it work on a SIG1911? Thank you in advance.
  1. 0 votes
    Q Does it work on a SIG1911? Thank you in advance. answer now
    A

    Sig makes a number of models. If it is a full size and does not have a rail, it will fit. If you aren't sure, you can check these measurements. If they match, it will fit.

  2. Do you have anything that will fit a Springfield Armory 1911 EMP Contour Carry, four inch?
  3. 0 votes
    Q Do you have anything that will fit a Springfield Armory 1911 EMP Contour Carry, four inch? answer now
    A

    We do not at this time

  4. I see in the answers for the CC3H that the measurement chart is actually for the CC3P. Are they the same? or is there another measurement chart that should be shared for folks wanting to get the CC3H??
  5. 0 votes
    Q I see in the answers for the CC3H that the measurement chart is actually for the CC3P. Are they t...... Read more answer now
    A They are the same
  6. will it fit a Ticsas 1911 A1 U.S
  7. 0 votes
    Q will it fit a Ticsas 1911 A1 U.S answer now
    A

    Yes

  8. I saw in the description that this model will fit commander models, but will it work with a 4 inch barrel model? I have a Rock island 1911 single-stack.
  9. 0 votes
    Q I saw in the description that this model will fit commander models, but will it work with a 4 inc...... Read more answer now
    A

    This measurement guide should help (it is in millimeters)

  10. Will this fit the double stack Para Ordnance P-14 LDA?
  11. 0 votes
    Q Will this fit the double stack Para Ordnance P-14 LDA? answer now
    A Sorry, standard Frame 1911’s only – no “double stacks” or compact frames.
  12. Will it fit SAR K9 or K12 sport?
  13. 0 votes
    Q Will it fit SAR K9 or K12 sport? answer now
    A It will not. The CC3H will only fit 1911 models
  14. Will this fit on the GSG-Sig 1911-22?
  15. 0 votes
    Q Will this fit on the GSG-Sig 1911-22? answer now
    A

    Yes

  16. Does this fit the Springfield 1911 A1 mil- spec?
  17. 0 votes
    Q Does this fit the Springfield 1911 A1 mil- spec? answer now
    A

    Yes

  18. Will this fit any of the SR1911 models from Ruger?
  19. 0 votes
    Q Will this fit any of the SR1911 models from Ruger? answer now
    A

    Yes. It fits all full size 1911's that do not have a rail.

  20. will this fit full size rock island armory gi?
  21. 0 votes
    Q will this fit full size rock island armory gi? answer now
    A

    No. But the CC3P will

  22. One more question, do any of the rails fit Remington's Enhanced 1911 models?
  23. 0 votes
    Q One more question, do any of the rails fit Remington's Enhanced 1911 models? answer now
    A

    Yes, the CC3H and the CC3C

  24. Will this fit a round heel sig 1911 nightmare?
  25. 0 votes
    Q Will this fit a round heel sig 1911 nightmare? answer now
    A It is not compatible
  26. Does this fit the llama model 8 9mm single stack 1911?
  27. 0 votes
    Q Does this fit the llama model 8 9mm single stack 1911? answer now
    A It does not
  28. are any of the models fitted for Commander size (4.25) 1911's? (no 1911 model specifically). Thank you for your time.
  29. 0 votes
    Q are any of the models fitted for Commander size (4.25) 1911's? (no 1911 model specifically). Than...... Read more answer now
    A

    CC3H and CC3P both fit Commander sized 1911's

  30. will this fit a kimber custom II?
  31. 0 votes
    Q will this fit a kimber custom II? answer now
    A

    If it doesn't have a rail, yes

  32. Will this work with the G7 holster?
  33. 0 votes
    Q Will this work with the G7 holster? answer now
    A

    It will not. It is designed to work with pistols that have a rail built-in. 

  34. Will the CC3H fit a Colt Series 70 Combat Commander?
  35. 0 votes
    Q Will the CC3H fit a Colt Series 70 Combat Commander? answer now
    A

    Yes

  36. is the rail 20 MM?
  37. 0 votes
    Q is the rail 20 MM? answer now
    A

    It's a standard pic rail

  38. Will this fit the Taurus PT1911?
  39. 0 votes
    Q Will this fit the Taurus PT1911? answer now
    A

    Not this product. The CC3P will fit.

  40. Does anyone know the link or what that slide is called or where to find it?
  41. 0 votes
    Q Does anyone know the link or what that slide is called or where to find it? answer now
    A

    Which slide?

  42. Will this fit the Springfield 1911 MIL-SPEC? Also can a different color be ordered that is not listed..?
  43. 0 votes
    Q Will this fit the Springfield 1911 MIL-SPEC? Also can a different color be ordered that is not li...... Read more answer now
    A

    Yes, as long as it doesn't have a rail

  44. Which one will fit a Tisas M45 4.25 1911?
  45. 0 votes
    Q Which one will fit a Tisas M45 4.25 1911? answer now
    A

    The CC3P will fit. Click here for the CC3P

  46. Will this fit the Walther Colt Gold Cup Trophy .22LR?
  47. 0 votes
    Q Will this fit the Walther Colt Gold Cup Trophy .22LR? answer now
    A

    Yes

  48. What size is the added hardware mine vibrated loose
  49. 0 votes
    Q What size is the added hardware mine vibrated loose answer now
  50. Do you make one that fits a para p14 double stack?
  51. 0 votes
    Q Do you make one that fits a para p14 double stack? answer now
    A

    We don't

  52. I have a colt 45 government model 80 series will this fit?
  53. 0 votes
    Q I have a colt 45 government model 80 series will this fit? answer now
    A Yes
  54. Does it work for an airsoft 100th anniversary Cybergun/Kwc M1911A1. Thanks
  55. 0 votes
    Q Does it work for an airsoft 100th anniversary Cybergun/Kwc M1911A1. Thanks answer now
    A It might - but we generally don't comment on airsoft since the tolerances are not always the same as the corresponding real firearm. If you buy it and it works, please let us know in your review here.
  56. Will this work on double stacks?
  57. 0 votes
    Q Will this work on double stacks? answer now
    A

    Nope

  58. I have a rock island 1911 in 45 acp will this work
  59. 0 votes
    Q I have a rock island 1911 in 45 acp will this work answer now
    A

    No. But our CC3P is meant for the full sized single stack Rock Island without a rail. You can see it here.

  60. Will these fit a rock island armory cs 9mm
  61. 0 votes
    Q Will these fit a rock island armory cs 9mm answer now
    A

    That won't fit. But the CC3C available here, will fit.

Send me a notification for each new answer.

User Submitted Photos

Click Here To Submit Your CC3HB1 Photo

The best submissions will be selected for FREE merch.

Upload File

I have read and agree to the Terms & Conditions.
CC3HB1
$25.00$39.95 Select options
6674