Does this fit the Glock 21 Gen 4 .45 acp?

It does not. You can see the fit chart tab on this page for a full compatibility list

Will this work with a compatible glock with a longer aftermarket barrel like the Lone Wolf 6" or 9"?

Sorry. I got this wrong. It is compatible with any barrel, except for compensated barrels.

Is this considered a sbr ; explains the legal issues of this product; nobody wants to end up in court for purchasing this item

We don't provide legal advice. You can read our disclaimer here. Any follow-up should be addressed to a lawyer.

When will the P-IX+ officially come out?

End of this month. Although, technically, it's already shipping. The only thing not included in the early release version is the MFG Metal Front Guard which will be available for purchase separately at a discounted rate for early release purchases - also at the end of March.

Hello, I'm in the Philippines. Do you accept orders from here? I think your product accepts only Glock pistols, will you be having same item but for other gun brands, say CZ P10, Sig, Taurus G3 or other strikerfire type pistols? I do have a P10C pistol but don't have any glock.

We don't deliver to the Philippines. You can try our resellers zahal.org or israeldefensestore.com . P-IX only accepts Glock. We may add versions for other models in the future.

Is it compatible with the G44?

No. You can see the fit chart tab above for a full list of compatible models.

I saw in one of the questions asked if a G19 with a Truglow site would fit and the response was, yes, if the site was removed. But yet on the Fit List for 19’s it starts with Gen 2. So the question is, will it fit an older G19?

Yes, it will fit with oem sights

How much is the faux silencer? I don't see it for sale on the website.

We don't carry any silencers or barrel extenders. The photo is just to demonstrate that it is possible to use one with this setup.

Do you have any plans to make this for the P320? Or any of your other amazing products for the P320?

Nothing in the pipeline right now, but hey, you never know.

Will it work on a beretta apx centurion 9mm?

No. Only on the Glock models listed in the fit chart on this page.

I've looked through the FAQs but didn't see anything reference the min/max magazine capacity. Will the 15 round glock mag fit?

It fits all Glock mags since it uses the Glock's magazine well

Can I purchase the tube and adjustable stock from you separately? I purchased the P-IX from a dealer at a Gun show and it came with the blade type brace and the tube is slick, no place for an adjustable stock to click in place.

Sure. P-IX will take any AR-compatible stock+tube. Ours is available for purchase separately here.

Does this work with the PSA dagger?

OEM Glock only (as far as we know)

Does it fit with glock 35?

Yes. It works with these: G35 GEN3, G35 GEN4, G35 GEN4 MOS (see the fit chart tab on this page for the full list)

Any plans for the glock 30 in the near future Majority of the people in Loxahatchee I've shown this to, tend to carry the same This would knock mck out of the water

Nothing planned at this time but stay tuned

Why doesn't it fit the Glock 22 gen 2?

That is an error. It does fit Gen2. We have updated the fit chart to reflect that.

Will a Glock 17M fit the P-IX?

The only possible issue are the sights. you may have to modify the charging handle or replace the sights for it to be compatible. Feel free to order and return it as per our money-back guarantee if it doesn't work out. If you do try it, I'm sure other users here would be grateful to know how it worked out for you.

Does it work for the Glock 19x? And do you ship out side usa like saudia arabia ? Thank you ..

It does work with the 19X. It is not available to be shipped outside the US. In the future, it will likely be available through resellers who do ship this type of item internationally but not at this time.

I kinda feel confused about the chart. Is it saying the ones that it’s not able to work with or the ones it does work on

The chart shows which Glock models are compatible with the P-IX

Does it work for the Glock 21 sf

P-IX is not compatible with the G21SF. For the full compatibility list, see the fit chart. the Glock 21 is compatible with the 20/21 Stabilizer Kit.

What is the maximum diameter of suppressor can fit this chassis

That is not an easy question to answer since it will vary from gun to gun

I have a Glock 22 and a Glock 34 both are probably 10 years old . Will both work in this particular shell?

P-IX is compatible with G22 GEN3, G22 GEN4, G22P, G34 GEN3, G34 GEN4, G34 GEN4 MOS, G34 GEN5, G34 GEN5 MOS (see the Fit Chart tab for a full list of compatible Glocks)

How can I buy it in Europe/Poland??

You can order through Zahal.org or IDS.

how would one connect a folding stock

Same as you would connect any stock to an AR-15

Will it fit a glock 19 with a flared magwell just curious if i need to take it off before inserting.

It won't fit with the flared magwell installed. You would have to remove that first.

Will this product fit a glock 17L gen 3

It will not - only a G17 (not G17L)

If I beg hard enough, will you make one for Glock 29??

No plans at this time but I did forward the request.

Glock 17 Gen 4. When the slide locks back after last-round hold-open, how do you access the slide release lever on the lower? It seems to be covered up and I can't get to it.

Sorry - got that wrong. You need to remove the magazine and then drop it forward with the P-IX charging handle.

What all sights work with the P-IX?

If you mean which gun sights can be on your weapon prior to installing the P-IX, the answer is only stock, OEM sights. If you mean what sights can you attach to your P-IX unit, then any sights that can attach to a rail like the Sightmark and Flip Up sights we carry.

What does the adjustable trigger mean?

You can tighten the stiffness of the trigger by tightening down the screws on the trigger.

Hello, I've purchased several of your 20/20 and 20/21 braces for my Glocks, probably gonna run one of these in the near future, however what I would love more than anything it to have something for my Springfield products. Specifically the XDM line. As far as product carry over what works for the standard XDMs will also work for their elites. The overall gun is the same. Will y'all please do something for the XDMs.

Thanks for the love Jason. Will pass your request on.

Some pics show with an attached longer barrel. Is this available from you?

We don't carry any extended barrels at this time

How do you feel about people asking questions and wanting answers that they can find themselves by reading the description or applying common sense?

lol. We'd rather people actually looked for their answer on the product page first. It's also the nature of the game. People move very quickly these days on their devices and scan rather than read. Our job is try to simplify as much as possible so people see exactly what they need to see where they expect to see it to help them make informed purchase decisions.

Will it work with a aftermarket timney trigger?

The P-IX might need to be modified to make it work

I noticed it doesn't work P80 Glock clone. Will it work with any Glock clones such as the Rock Island STK100, PSA Dagger or other Glock clones? If not are there modifications a gunsmith could do that would make a clone work?

Passed this question up the chain and received an emphatic "No" on all counts

Does it fit a Glock 22 gen 5 ?

It is not compatible - only Gen 3 & 4 (for G22). See the Fit Chart tab on this page for a full compatibility list

I don’t see Glock 27 Gen 5 on the list, anything in the works for that model 27-gen 5

The 20/20N is compatible with the Glock 27. Although, the GEN 5 slide is not compatible with the bundled charging handle. Since the Stabilizer frame covers the slide grips, you will need an alternate way to rack the slide like an RMR or some other solution. If you have a GEN 5 slide and an alternate way to rack the slide, you can use the 20/20N. As far as a P-IX for G27, possibly upcoming but nothing firm.

In the near future is it going to be compatible with glock 30 .45 ACP?

Nothing planned at the moment but stay tuned

Why is the upper rail missing?

Not sure what you mean "missing". Maybe you are referring to a design change that entered into production since we released the original images where we removed a section of rail above the ejection port. In the final version of the product, the upper rail goes end to end with a break over the ejection port.

What is the difference between B and MG??

The "B" (basic) includes only the housing and pistol grip (the black areas of this image) (you can also choose with out without a stock + buffer tube) in the options above) The "MG" (reference to MG9 angled mag pouch) has the MG9 angled mag pouch and SR20 side rails included as well As noted above, the stock can be added via the dropdown menu above to either the B or MG, and we also have an add-on option for flip up sights.