Will this fit a geisler defense 1917 g19x clone basically a g19x with a 1913 rail instead of glocks set up it’s basically a gen3 g19 clone

It is not compatible to my knowledge

When can I buy the 80 charging handle, since I have not been able to locate it on your website for purchase? If not, can you share a schematic so I can 3D print it? Kind regards.

It is no longer available. Sorry. You can reach out to P80 directly with any follow-up questions.

Y’all know if this or the regular 20/20 fit a 80percentarms.com gst-9

Probably not. The frame would need to be an exact match to Glock or P80. Maybe it's close enough that you can make it work but I can't say. You can buy and return as per our return policy (but only in new condition).

I’ve seen conflicting info so far—will either the 20-20 or the 20-80 work on a Shadow Systems model? Has there been confirmed success of trying this?

Can't say. You have 2 areas of compatibility, the brace itself, and also the charging handle which is necessary since the brace covers parts of the slide.

Does the 20/80 work also with the Strike Industries 80 percent frame?

Almost certainly not out of the box. The fit is precise. But maybe you can get it to work. Feel free to order and return if it doesn't look like it will work (in original condition) if you want.

Good day i am looking for something like this for so so lone i had a roni. We do recoveries of stolen cars so to get it is and and will not work so i mounted a Vortex viper on my CZ P09 now i am looking for something like your product to just add my pistol and use my red dot that I know. Do you have something dor me ill buy everything needed to make it work please please i dont know where to go from here please

For CZ? We don't have any kits for CZ. We currently have kits for Polymer80, Glock, S&W, & 1911.

hello, will this work with a shadow systems dr920? thank you. patrick

If it is an exact clone of any of these, yes: Polymer80 (PF940V2, PF940C, PFC9, PFS9)

how left hander (wrong handedness) friendly is the 20/80?

Yes. There is nothing that makes it left or right-handed, except the way the brace folds. If you don't plan on carrying it holstered, you will not have any issue.

Does this work with any brand slide as long as the frame is one of the compatible ones listed? I don’t have a polymer 80 slide on my polymer 80 frame, I have a zafiri precision slide on a polymer 80 pf940c frame

The challenge you'll face if you are not using a Glock slide is racking the slide. Once the stabilizer is installed, it covers the slide grips so you'll need a charging handle or some other solution in order to rack the slide.

I own both glocks and polymer 80. Is there any way to make this kit compatible with both handgun models by purchasing extra parts?

We don't have any kit or parts like that for sale.

In the bundle selector you have multiple letter options. What is the difference in the bundles

Here is what comes in each bundle: 20/80B – Stabilizer Frame, Brace w/Strap 20/80S – Stabilizer Frame, Brace w/Strap, Minimalist Sling, Picatinny Side Rails 20/80H – Stabilizer Frame, Brace w/Strap, Minimalist Sling, Picatinny Side Rails, G7 Holster w/Pistol Adapter (Can be used without the 20/80 stabilizer brace) 20/80MG – Stabilizer Frame, Brace w/Strap, Minimalist Sling, Picatinny Side Rails, G7 Holster w/Pistol Adapter (Can be used without the 20/80 stabilizer brace), MG9 Angled Mag Pouch For Glock Magazines

I have a Glock 21 with a p80 lower frame. Would it fit. Very interested

I don't think I'd recommend it, but if you're crazy enough you could get this and do a bunch of material removal in the rear beavertail area and it can be made to fit a PF45. Again, wouldn't recommend it, but it is possible. The 45 frame is a little longer and thicker. I wouldn't know this from experience or anything *cough* *cough*

With the Glock version of this it fits every double stack Glock from the G45 all the way down to the G26. This does not have the PF940sc (G26 p80) listed as compatible. If the Glock version will fit all double stack models then will this fit all p80 double stack models? I saw your response to the same question answered previously but it did nothing to confirm or deny this. Even if it hasn’t been tested then would it theoretically work on the pf940sc? I don’t want to shell out money to be disappointed and nowhere does it state that it will NOT fit the pf940sc and since the Glock version fits all double stack is it safe to assume this one does? I don’t understand why it wouldn’t. Any feedback is much appreciated thank you.

It does not fit anything other than the listed models.

Can u shoulder the stabilizing brace

It is not designed to be shouldered. We do sell a buttstock attachment separately which when added to the Stabilizer Brace is designed to enable shouldering.

Does the fit the pf940sc?

It is designed for an tested to fit these models: PF940V2, PF940C, PFC9, PFS9

Is it supose to have play from left to right or is it supose to be tight.

There should be no play if installed correctly

Will this fit a Palmetto State Armory Dagger?

It's been designed for and tested to fit Polymer80 PF940V2, PF940C, PFC9, PFS9. I can't comment on anything else but if you try it and it works, let us know here

Will the 20/20 or 20/21 accessories fit the 20/80 kit?

Yes. They are all compatible as of now. But it is possible that new products may be introduced in the future that are not so please check the product page for compatibility.

What are the dimensions of the brace folded and unfolded?

Approx. 272cm folded and 460cm extended

WHAT DO YOU MAKE THAT FITS A GLOCK 40 4 GEN, 15 SHOT 10MM?

The 20/21 Stabilizer is compatible

Does the stabilizer brace for the polymer 80 come with a charging handle, or does it have to be purchased separately ?

Just make a selection from the "Add Charging Handle" dropdown above to include a charging handle with your bundle

Skip to navigation Skip to content

Your Cart

Search for:

My Account
Customer Help
Checkout

$0.00 0

What are you looking for?

Free Shipping Sitewide! (Limited Time Offer)

US

What are you looking for?

Search for:

Shop
Merch
User Photos
My Account
About
Shipping & Delivery
Support
Affiliates
Dealers
- Become a Dealer

$0.00 0

[pc-notice]

Home / P80 Only

P80 Only

Show Filters

Showing the single result

Best Selling Products, Compact Rails and Over Rails, Featured, Glock, Glock Compatible Accessories, Newest Products, P80 Only, Polymer80, Rail Adapters, Stabilizer Kits, Stabilizer kits & Compatible Accessories, Stabilizers, WS

Recover Tactical® 20/80 Stabilizer Kit for Polymer80 (PF940V2, PF940C, PFC9, PFS9)
Rated 4.90 out of 5
$99.95 – $219.95 Select options